Card ISA 16 kênh DI + 16 kênh Relay ICP DAS P16R16DIO CR
Features
- Relay output Channel
- Isolated DI channels
- AC/DC signal input ; AC signal input with filter
- Connector pin assignment is compatible to 725 series
- Power Requirements : 200 mA @ +5 V (max.) ; 260 mA @ +12 V (max.)
- LED indicator for each relay output state
Introduction
The P16R16 DIO is a 16 isolated DI and 16 relay output interface board designed for control and sensing applications. This interface board is easily installed in any PC/AT/XT.The P8R8 DIO Provides 16 electromechanical relay outputs and 16 Isolated inputs. The P16R16 DIO has two 37-pin D-Sub Connector and the function is equal to two P8R8DIO.
Applications
- Factory Automation
- Product Test
- Laboratory Automation
- Security Control
Click to view the Introduction of https://mctt.vn/isa-icp-das
Specifications
| Hardware |
| Connector |
Female DB37 x 1 |
| Digital Input |
| Channels |
16 |
| Type |
Wet Contact
Photocoupler |
| Sink/Source (NPN/PNP) |
Sink/Source |
| ON Voltage Level |
AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz) |
| OFF Voltage Level |
AC/DC 0 ~ 1 V |
| Response Speed |
Without Filter: 45 kHz (Typical)
With Filter: 0.05 kHz(Typical) |
| Trigger Mode |
Static Update |
| Isolation |
5000 Vrms |
| Relay Output |
| Channels |
16 |
| Type |
8 SPDT, 8 SPST |
| Contact Rating |
AC/DC:120 V@0.3 A
DC: 30 V@1 A |
| Operate Time |
5 ms (Typical) |
| Release Time |
5 ms (Typical) |
| Electrical Endurance |
100,000 ops. |
| Mechanical Endurance |
100,000 ops. |
| PC Bus |
| Type |
ISA |
| Data Bus |
8-bit |
| Power |
| Consumption |
200 mA @ +5 V
260 mA @ +12 V |
| Mechanical |
| Dimensions (mm) |
121 x 175 x 22 (W x L x D) |
| Environment |
| Operating Temperature |
0 ~ +60°C |
| Storage Temperature |
-20 ~ +70°C |
| Humidity |
5 ~ 85% RH, Non-condensing |
Download
Datasheet
Documents
Ordering Information
| P16R16DIO CR |
ISA Bus, 16-ch Isolated D/I and Relay Output (RoHS)
Includes one CA-4037B cable and two CA-4002 D-Sub connectors |
