Bộ chuyển đổi EtherCAT sang Quang (1 sợi, Single Mode TX 1550 nm, RX 1310 nm, SC, 15KM) ICP DAS ECAT-2511-B CR

Chia sẻ:
Mã sản phẩm: ECAT-2511-B
Thương hiệu: ICP DAS
Tình trạng:

EtherCAT to Single-mode Fiber Converter

Liên hệ
Mô tả

Bộ chuyển đổi EtherCAT sang Quang (1 sợi, Single Mode TX 1550 nm, RX 1310 nm, SC, 15KM) ICP DAS ECAT-2511-B CR

Feature

  • Powerful MCU handles efficient network traffic
  • Distance between Stations up to 25 km (100BASE-FX)
  • 50% Cost Saving for Fiber Optic Infrastructures
  • EtherCAT conformance test tool verified
  • ESD Protection 4 KV Contact for each port

Introduction

 

The ECAT-2511-A and ECAT-2511-B are EtherCAT to single-mode fiber optic converter. They are designed not only to convert EtherCAT signals to optical signals on a fiber optic cable, to reshape the EtherCAT signal to compensate for distortion, but to isolate the bus error due to the wire short or disturbance. With the advantage of fiber optic, the ECAT-2511-A and ECAT-2511-B enable secure data transmission via fiber optic transmission, and helps the EtherCAT network to prevent the noise from EMS/RFI interference. 50% Cost Saving for Fiber Optic Infrastructures: With a pair of ECAT-2511 series products (ECAT-2511-A and ECAT-2511-B), you can double the utilization of your existing, costly fiber optic cable, and save 50% of the cost of a newly installed fiber optic application.

Application

  • Regular, two fibers

  • ICP DAS, one fiber

Specifications

Ethernet
Ports 1 x RJ-45
Distance between Stations: Max. 100 m (100BASE-TX)
Data Transfer Medium: Ethernet/EtherCAT Cable (Min. CAT 5e)
Fiber
Ports Single-Mode; SC connector x 1
Wavelength TX: 1550, RX: 1310 nm
Distance Between Stations 25 km (9/125 μm recommended)
EtherCAT
Ports 1 x RJ-45, 1 x Fiber head
No. of Nodes 1
Distributed Clocks Max. 100 m (100Base-TX)
Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC
Consumption 0.1 A @ 24 VDC
Mechanical
Casing Plastic
Dimensions (mm) 33 x 127 x 100 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

ECAT-2511-B     CR  EtherCAT Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC (RoHS)
Đăng nhập
Đăng ký
Hotline: 0904251826
x