Bộ đổi nguồn 220VAC sang 15VDC 40A Leyu SCN-600-15
Single Output with Parallel Function SCN-600 series
Featur
·High reliability, low ripple
·Universal AC input/ full range
·Protections: Short circuit/ Over load/ Over voltage/ Over temperature
·Built-in ON-OFF control and remote sense function
·With parallel function
·Can adjust from 40%~100% output voltage by external control 2-5V
·Forced air cooling by built-in DC fan
|
SPECIFICATIONS |
|
OUTPUT |
|
|
MODEL |
SCN-600-12 |
SCN-600-15 |
SCN-600-24 |
SCN-600-48 |
SCN-600-60 |
|
DC Voltage |
12V |
15V |
24V |
48V |
60V |
|
Rated Current |
50A |
40A |
25A |
12.5A |
10A |
|
Current Range |
0-50A |
0-40A |
0-25A |
0-12.5A |
0-10A |
|
Rated Power |
600W |
600W |
600W |
600W |
600W |
|
Ripple & Noise |
120mVp-p |
150mVp-p |
240mVp-p |
480mVp-p |
480mVp-p |
|
Voltage Adj. Range |
±5%; Can adjust from 40%~100% output voltage by external control 2-5V |
|
Voltage Tolerance |
±1% |
±1% |
±1% |
±1% |
±1% |
|
Setup, Rise, Hold Up Time |
800ms, 50ms, 16ms at full load |
|
|
|
|
INPUT |
|
|
Voltage Range |
90~130VAC/180~260VAC selected by switch 47~63Hz; 260~370VDC |
|
AC Current |
11A/115VAC 7.0A/230VAC |
|
Efficiency |
80% |
81% |
85% |
87% |
|
Inrush Current |
60A/230V |
|
Leakage Current |
3.5mA/240VAC |
|
|
|
|
PROTECTION |
|
|
Over Load |
110%~135% |
|
Protection: Protection:Current limiting, delay shut down o/p voltage, re-power on to recover |
|
Over Voltage |
110%~135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
|
Over Temp |
TSW1(Power transistor) When temp. >100℃, shut down o/p voltage, re-power on to recover |
|
|
|
|
ENVIRONMENT |
|
|
Working Temp., Humidity |
-10℃~+65℃; 20%~90%RH |
|
Storage Temp., Humidity |
-20℃~+85℃; 10%~95%RH |
|
Vibration |
10~200Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
|
|
|
|
SAFETY |
|
|
Withstand Voltage |
I/P-O/P, I/P-FG:1500VAC |
|
Isolation Resistance |
I/P-O/P, I/P-FG, >100M Ohms / 500VDC |
|
|
|
|
STANDARD |
|
|
Safety Standard |
Design refer to UL1950,CSA22.2,IEC60950 |
|
EMC Standard |
Design refer to FCC Part 15 Class A |
|
|
|
|
OTHERS |
|
|
Dimension |
291*132*68mm(L*W*H) |
|
Weight |
2.57Kg |
|
Packing |
6pcs/15.42kg/CARTON |
|
|
|
|
NOTE |
|
|
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
