Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet sang Quang (1 sợi, Single Mode TX 1550 nm, RX 1310 nm, SC, 15KM) ICP DAS NS-200WDM-B CR
Feature
• Automatic MDI / MDI-X crossover for plug-and-play
• Supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x flow control
• 1.4Gbps high performance memory bandwidth.
• Power Input, +12 ~ +48 VDC
• Reverse Polarity Protection
• Supports operating temperatures from 0 ~ +70°C
• DIN-Rail
Introduction
Using the fiber optic medium for Ethernet applications has become more popular due to fiber optic's excellent physical features, especially for long distance networks.
However, fiber optic cable is very expensive, so if we can apply a solution that uses only 1 cable instead of 2, the infrastructure cost can be cut in half.
The NS-200WDM Series provides a solution that reduces your expense by 50%!
The NS-200WDM Series of Single-Strand Fiber Converters supports Wavelength Division Multiplexing (WDM) technology that allows two independent data communication channels to transmit and receive over one standard, single mode, fiber optic line. This not only doubles your existing bandwidth, but also effectively reduces the cost of creating a new fiber optic infrastructure.
50% Cost Saving for Fiber Optic Infrastructures
With a pair of NS-200WDM series products (NS-200WDM-A and NS-200WDM-B), you can double the utilization of your existing, costly fiber optic cable, and save 50% of the cost of a newly installed fiber optic application.
It contains "soft start" function with overload protection, high-low voltage protection.
The width of the NS-200WDM is just 32mm, so it can be used where space is important.
Important Note : You must purchase both NS-200WDM-A and NS-200WDM-B since these products work as a pair.
Application
Specifications
| EMS Protection |
| ESD (IEC 61000-4-2) |
Yes |
| LED Indicators |
| Status |
PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port) |
| Ethernet |
| Ports |
1 x RJ-45, 10/100Base-TX |
| Standards |
IEEE802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward wire speed switching |
| MAC Table |
1024 |
| Memory Bandwidth |
1.4 Gbps |
| Isolation |
1500 Vrms 1 minute |
| Fiber |
| Ports |
1 x 100 Base-FX, SC connector |
| Mode |
Single-Mode |
| Fiber Cable |
8.3/125, 8.7/125, 9/125 or 10/125 μm |
| Distance |
15 km, (9/125 μm mrecommended) for full duplex |
| Wavelength |
TX: 1550, RX: 1310 nm |
| TX Output |
-14 dBm Min.
-8 dBm Max. |
| RX Sensitivity |
-31 dBm |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Range |
+12 ~ +48 VDC (Non-isolation) |
| Consumption |
0.12 A @ 24 VDC, +/- 5% arrowed with 100M Full duplex |
| Mechanical |
| Casing |
Plastic |
| Dimensions (mm) |
33 x 107 x 85 (W x L x H) |
| Installation |
DIN-Rail Mounting |
| Environment |
| Operating Temperature |
0 °C ~ +70 °C |
| Storage Temperature |
-20 °C ~ +85 °C |
| Humidity |
10% ~ 90% RH, non-condensing |
Download
Datasheet
Documents
Ordering Information
| NS-200WDM-B CR |
10/100BaseT(X) to 100BaseFX Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC (RoHS)
Important Note : You must purchase both NS-200WDM-A and NS-200WDM-B since these products work as a pair. |
