-
- Tổng tiền thanh toán:
Cảm biến đo Momen xoắn trục quay không tiếp xúc (Rotating Torque Sensors with Non Contact Transmission) hãng Lorenz Messtechnik GmbH
Cảm biến đo Momen xoắn trục quay không tiếp xúc (Rotating Torque Sensors with Non Contact Transmission) hãng Lorenz Messtechnik GmbH
Torque transducers with non contact transmission are supplied as active sensors with integrated measuring amplifiers; as output signals, analog ±5V by default, ±10V optionally, or digital RS485 or USB are available. By the non contact transmission, the measurement data are transmitted maintenance-free and without signal distortion between rotor and stator. Integrated speed/angle measurement is available as an option for almost all non contact sensors. Mechanically, our non contact transducers can be divided in 2 sections: sensors with bearings and bearingless sensors. The advantage of bearingless transducers is that bearing friction cannot falsify the measurement result and they are usually designed for higher speeds. For digital sensors, we distinguish 2 product groups: sensors with RS485 interfaces or transducers with USB interfaces. RS485 torque transducers are characterized by a particularly high noise immunity, even with very long connection cables. For displaying, our USB sensors do not require additional and often expensive and complicated to use measuring amplifiers. Via plug-and-play, the transmitter can be easily connected to a standard PC. Before initial operation, only the USB driver, included in the scope of delivery, as well as the configuration and analysis software must be installed on the PC. Typical applications for this sensor type are for example screw driving technologies, test bench applications such as the examination of engines, gears, bearings and seals, … wherever high speeds in continuous operation and standardized output signals are required on sensor side.
NON CONTACT SENSORS, ROTATING
Image | Type | Measuring Range [N·m] | Accuracy Class | Speed/Angle Measurement |
Mechanical Connection |
---|---|---|---|---|---|
DR-3000 DR-3000-P |
0.1..5000
USB Torque Sensor, inclusive |
0,1 (Option: 0.05) | ✓ Standard | Cylindrical Shaft | |
DR-2643 DR-2643-P |
0.1..5000 | 0,1 (Option: 0.05) | ✓ Option | Cylindrical Shaft | |
DR-2112 DR-2112-P DR-2412 DR-2412-P |
0.1..20000 | 0.1 (Option: 0.05) |
✓ Option | Cylindrical Shaft | |
DR-2112-R DR-2112-R-P DR-2412-R DR-2412-R-P |
0.1..1000 | 0.2 | ✓ Option | Cylindrical Shaft | |
DR-2212 DR-2212-P DR-2512 DR-2512-P |
0.1..20000 | 0.1 (Option: 0.05) |
✓ Option | Cylindrical Shaft | |
DR-2212-R DR-2212-R-P DR-2512-R DR-2512-R-P |
0.1..1000 | 0.2 | ✓ Option | Cylindrical Shaft | |
DR-2477 DR-2477-P |
0.2..200 | 0.25 | - | Cylindrical Shaft | |
DR-2500 DR-2600 |
0.005..150 Miniature Torque Sensor without Bearings |
0.1 | ✓ Option (only Speed Measurement) |
Cylindrical Shaft | |
DR-2554 | 50..1000 Bearingless |
0.1 | ✓ Option (only Speed Measurement) |
Disk Hub Clamping Ring Hub Keyway Hub |
|
DR-2800 | 50..10000 Bearingless |
0.1 | ✓ Option (only Speed Measurement) |
Flange | |
MR-12 | 20..5000 Sensor for Belt-Pulleys |
0.1 | ✓ Option | Mounting-Hole with Keyway | |
DR-2481 | 260 | 0.5 | - | External / Internal Spline Drive | |
Dual Range Sensor | Type | Measuring Range [N·m] | Accuracy Class | Speed/Angle Measurement |
Mechanical Connection |
DR-2208 DR-2208-P DR-2508 DR-2508-P |
0.5 / 5..2000 / 20000 Dual Range Sensor |
0.1 | ✓ Option | Cylindrical Shaft | |
DR-2531 DR-2531-P DR-2831 DR-2831-P |
0.5 / 5..2000 / 20000 Dual Range Sensor |
0.1 | ✓ Option | Cylindrical Shaft | |
Sensors for Screw Driving Systems | Type | Measuring Range [N·m] | Accuracy Class | Speed/Angle Measurement |
Mechanical Connection |
DR-3001 | 0.1..5000
USB Torque Sensor, inclusive |
0.1 | ✓ Standard | Male Square Drive / Female Square Drive | |
DR-2113 DR-2413 |
0.1..5000 | 0.1 | ✓ Option | Male Square Drive / Female Square Drive | |
DR-2493 | 0.1..5000 | 0.25 | ✓ Option | Male Square Drive / Female Square Drive | |
DR-3003 | 0.1..20
USB Torque Sensor, inclusive |
0.1 | ✓ Standard | ¼" Hexagon Drive / Quick Change Chuck | |
DR-2153 DR-2453 |
0.1..20 | 0.1 | ✓ Option | ¼" Hexagon Drive / Quick Change Chuck | |
DR-2494 | 0.1..20 | 0.25 | ✓ Option | ¼" Hexagon Drive / Quick Change Chuck | |
DR-2114 DR-2414 |
0.1..20 | 0.1 | ✓ Option | ¼" Hexagon Drive / Quick Change Chuck | |
DR-1986 DR-1987 DR-1988 DR-2124 |
1..500 | 0.3 | ✓ Standard | Male Square Drive / Female Square Drive External / Internal Spline Drive |