Camera công nghiệp USB3.0 Area Scan 1/1.3" CMOS, 4.2um, 4MP, 1744×2336, 51.5fps MindVision MV-SUA403GM
The transmission speed of USB3.0 is significantly higher than USB2.0 and GigE cameras. With 5Gbps transmission bandwidth and high-speed sensor, the camera of 0.3MP and 800 fps can achieve a minimum transmission time of 1.2 ms, and a 20MP pixel camera can also reach 18fps; Due to the abundant transmission bandwidth, a computer is compatible with multiple camera operation, meanwhile, high frame rate can be guaranteed; The USB 3.0 series has a low CPU utilization, adopting DMA transmission, and the 5Gbps data tranmission hardly occupies CPU resources
Tính năng
- The camera comes with programmable IO.
- Support external trigger strobe to take photos synchronously.
- Support 8bit to 12bit raw data output.
- Fully compatible with GIGE camera's SDK for seamless replacement.
- Multiple cameras on one computer can work stably without dropping or losing frames for a long time
- Support PC Linux system and ARM Linux system, available to be integrated into embedded devices
- Compatible with Vision protocol, seamlessly compatible with Halcon, VisionPro, Labview and other vision software
Thông số kỹ thuật
| Specifications |
MV-SUA403GM |
| Sensor |
1/1.3" CMOS |
| Camera type |
Mono |
| Pixel size |
4.2umx4.2um |
| Effective pixels |
4MP |
| Resolution @ frame rate |
1744×2336@51.5FPS |
| Sensitivity |
11900 mV/lux ·s @HCG 7430 mV/lux ·s @LCG |
| Exposure mode |
Frame exposure |
| Signal to noise ratio |
40 dB |
| Dynamic range |
Linear Mode: 60 dB; Wide Dynamic Range Mode: >100 dB |
| GPIO |
1 opto-coupler isolated input, 1 opto-coupler isolated output, 1 non-isolated input and output |
| Output pixel width |
12bit |
| AD width |
12bit |
| Frame buffer |
128M Bytes |
| Exposure time range |
0.012~790ms |
| Maximum gain (multiple) |
27 |
| User EEPROM |
2K Bytes |
| Frequency output format |
Mono 8bit /12bit |
| Video output format |
USB3Vision 1.0, GenICam |
| Lens interface |
C mount |
| Data interface |
USB3.0 TYPE B |
| Power supply |
12~24V ±10% |
| Power |
<4W |
| Boundary dimension |
29X29X32.7(mm)(Lens base and rear shell interface are not included) |
| Weight |
<75g |
| Working temperature |
0~50℃ |
| Working humidity |
20~80%(No Condensation) |
| Storage temperature |
-30~60℃ |
| Storage humidity |
20~95%(No Condensation) |
| Operating system |
WINXP, WIN7 / 8/10 32 & 64-bit systems, Linux and ARM Linux drivers and Android platform drivers MAC OS system |
| Driver |
Supports USB3 Vision 1.0 protocol software, DirectShow components, dedicated Halcon components, dedicated LabVIEW drivers, OCX components, and TWAIN components |
| Programming language |
C/C++/C#/VB6/VB.NET/Delphi/BCB/Python/Java |
| Other function |
Support any size ROI custom resolution, contrast and gamma adjustment, saturation adjustment, white balance correction, black level correction, custom dead point coordinate correction, ISP image processing acceleration, 3D noise reduction, custom LUT table, frame rate adjustment, custom camera name, etc |
Tài liệu
Datasheet
