Module 4 kênh đầu vào AI + 2 kênh đầu ra AO Kinco KS133-06IV

Chia sẻ:
Mã sản phẩm: KS133-06IV
Thương hiệu: Kinco
Tình trạng: Còn hàng

DC24V, 4 *AI,2*AO, (4-20mA/1-5V/0-20mA/0-10V), Modbus slave

Liên hệ
Mô tả

Module 4 kênh đầu vào AI + 2 kênh đầu ra AO Kinco KS133-06IV

 

Tính năng

  • Significant savings in installation space:

Thin plate compact design, thickness less than 25mm, can be installed in a small electrical cabinet.

  • Higher computing speed:

Adopt new MCU platform, 1000 bit instruction scan cycle is 0.25ms, can reach the same kind of small PLC first-class level.

  • Built-in CANopen interface:

KS105C1 and KS105C2 built-in CAN interface, which supports CANopen master station and slave station and CAN free protocol. With convenient motion control instruction library, it provides more cost-effective choice for multi-axis application occasions.

  • 4-channel high-speed pulse counter:

Provide 4-channel high speed pulse counter with maximum counting frequency of 200K. Each high-speed counter allows up to 32 PV values to be configured and supports 32 CV=PV interrupts. High-speed counter support a variety of modes, can be carried out single phase, double phase (Up/Down), AB phase (1 times frequency and 4 times frequency) count. Users can use the HSC configuration wizard in the programming software to configure visually.

  • 4-channel high-speed pulse output:

Provide 4-channel high-speed pulse output, both support PTO (pulse train) and PWM (pulse width modulation) mode output. Three of channels output frequency up to 200 KHz (load resistance is not greater than 1.5 K Ω), the other one output frequency is 10KHz;The software provides PLS (PWM or PTO) positioning control instruction group PFLO_F (follow instruction) and so on, which facilitates the user to realize simple motion control application.

  • Serial ports of communication:

Provide 1 RS232 and 1 RS485 Serial ports, Named PORT0 and PORT1 respectively, the highest communication baud rate is 115.2Kbps;PORT0 can be used as a programming port, and also supports Modbus RTU slave station protocol and free communication. PORT1 can be used as both programming port and Modbus RTU master station slave station protocol and free communication.

  • Extension modules are available as Modbus slaves:

The RS485 interface of the extended module can be used as a Modbus slave station to provide more cost-effective solutions for more applications.

Thông số kỹ thuật

CPU module
Model Order number Specification
Supply voltage DI DO Extension module High speed input High speed output COM port Dimension (L*W*H) (unit:mm)
KS101 KS101M-04DX DC 24V 4 None Up to 14 2*up to 200KHz
Single phase and AB phase
None

1*Ethernet

2*CAN

1*RS232
1*RS485 up to 115.2kbps
100*84.5*25.4
KS105 KS105-16DT 8 8*transistor 4*up to 200KHz
Single phase and AB phase
3*up to 200KHz
1*up to 10KHz
1*RS232
1*RS485 up to 115.2kbps
KS105C1-16DT None 1*CAN
1*RS232
1*RS485 up to 115.2kbps
KS105C2-16DT Up to 14 2*CAN
1*RS232
1*RS485 up to 115.2kbps
KS Series Extension module
Model Order number Specification
Supply
voltage
DI DO AI AO COM port Dimension (L*W*H) (Unit:mm)
KS121 KS121-16DX DC 24V 16 None 1*RS485, able be a slave station 100*84.5*25.4
KS122 KS122-14DT None 14*transistor None
KS122-12XR None 12*relay None
KS123 KS123-14DR 8 6*relay None
KS133 KS133-06IV None 4 2
KS131 KS131-04RD 4-channel thermal resistance input, two or three wire system, PT100, PT1000, Cu50, R.

Thông tin đặt hàng

  • KS133-06IV

DC24V, 4 *AI,2*AO, (4-20mA/1-5V/0-20mA/0-10V), Modbus slave

Tài liệu

Catalog

User Manual

Đăng nhập
Đăng ký
Hotline: 0904251826
x