Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet sang Gigabit Quang (Dual fiber, Multi Mode 1310nm, SC, 2KM) ICP DAS NSM-200SX2 CR
Feature
• Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-SX device
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input
Introduction
ICP DAS's line of feature rich 10/100/1000 Fiber Media Converters transparently connects copper to multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the line of non-fiber based equipment, or the distance between two devices. Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature.
Application
Specifications
| LED Indicators |
| Status |
PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M |
| Ethernet |
| Ports |
1 x RJ-45, 10/100/1000Base-T(X) |
| Standards |
IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network
activity |
| Processing Type |
Store & forward, wire speed switching |
| MAC Table |
8K |
| Memory Bandwidth |
10 Gbps |
| Frame Buffer Memory |
1 Mbit |
| Jumbo Frames |
10K |
| DIP Switch |
1 x LFP Enable |
| Fiber |
| Ports |
1 x 1000Base-FX, SC connector |
| Mode |
Multi-Mode |
| Fiber Cable |
50/125 μm |
| Distance |
2 km |
| Wavelength |
1310 nm |
| TX Output |
-9 dBm Min.
-1 dBm Max. |
| RX Sensitivity |
-19 dBm |
| RX Overload |
-1 dBm |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Range |
+12 VDC ~ +48 VDC Redundant dual Input(Non-isolated) |
| Redundant Power Inputs |
Yes |
| Consumption |
0.1 A @ 24 VDC |
| Alarm Output |
Yes,Relay 1 A @ 30 VDC |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
DIN-rail mounting: 33 x 120 x 109 (W x L x H)
Wall mounting: 33 x 159 x 103 (W x L x H) |
| Installation |
DIN-rail mounting or wall mounting (optional) |
| Environment |
| Operating Temperature |
-30 °C ~ +75 °C |
| Storage Temperature |
-40 °C ~ +85 °C |
| Humidity |
10% ~ 90% RH, non-condensing |
Download
Datasheet
Documents
Ordering Information
| NSM-200SX2 CR |
Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 1310 nm, 2 km, SC connector (RoHS) |
