MC&TT Co., Ltd

Part 6. Phần mềm SCADA Cimon Ultimate Access - Thiết kế đồ họa - Phần 3

Chia sẻ:

Part 6. Phần mềm SCADA Cimon Ultimate Access - Thiết kế đồ họa - Phần 3

6. Log Data Sheet

Log Data Sheet hiển thị dữ liệu đã truy xuất, dưới dạng lưới, từ tính năng [Data Logging] trong lưới. Đối tượng này hiển thị dữ liệu lịch sử trên màn hình. Nó cũng có thể lưu trữ dữ liệu trong bảng tạm và dữ liệu có thể được phân tích bằng các chương trình như Microsoft Excel

6.1 Components

6.2 Action

Để mở tab [Action], nhấp đúp hoặc nhấp chuột phải vào đối tượng và chọn [Object Config] trong menu bật lên. Bạn cũng có thể chọn đối tượng sau đó vào [Edit] – [Object Config]

Columns / Rows You can set the number of columns and rows.
Columns: 1~16 (Default: 3)
Rows: 1~50 (Default: 3)
Time Interval You can set an interval of the data to be displayed.
Interval: 1 sec ~ 12 hours (Default: 5 minutes)
Show Toolbar Displays the toolbar at the bottom of the log data sheet.
Show most recent on top Displays the latest data at the top of the log data sheet.
Always show data Decides how to display the logged data.
If you check the option, the entire data is displayed according to the
time interval. If the option is not checked, the data are displayed
according to the interval of data logging model.
Logged data tag Setting

You can configure the columns by double clicking the column title and pressing the [Edit] button as shown below.

Column 0 It is an area marked as ○1 in the figure shown above. You can set the time display type and the initial column length.
Column 1 - n It is an area marked as ○2 in the figure shown above. You can set the tag name, button title, tag format and the initial column length

(1) Column 0

Time display type There are 45 types in total. When you select a type, it will be applied to the current log data sheet object.
Initial Column
Length
Decides the initial length of the column.You can enter the value from 1 to 80.
The initial value is 16 and it may change according to the type display type.

(2) Column 1 - n

Bạn có thể đặt tên thẻ, tiêu đề nút, định dạng thẻ và độ dài cột ban đầu. Nếu bạn không chỉ định tiêu đề nút, tên thẻ sẽ được hiển thị trong vùng tiêu đề.\

Tag Name Enter the tag name to display the value. You can browse the tag by clicking the icon. You can also manually enter the tag name.
Button Title Enter the title of nth column’s button. If you do not enter the title, the tag name will be displayed in the area.
Format Decides the tag format to be displayed in the log data sheet object.
????The value will be displayed with corresponding Tag Value settings.
#### The value will be displayed in integer.
####.0 The value will be displayed including one decimal place.
####.00 The value will be displayed including two decimal places.
####.000 The value will be displayed including three decimal
places.
#,### The integer value will be marked every three digits.
#,###.0 The value will be marked every three digits including one
decimal place.
#,###.00 The value will be marked every three digits including two
decimal places.
#,###.000 The value will be marked every three digits including
three decimal places.
HHHH The value will be displayed in hexadecimal codes.
You can align the data to the left/center/right.
Initial Column Length Decides the initial length of the column. You can enter the value from 1 to 80. The initial value is 5

6.3 Object Configuration

A log data sheet object can be set with the basic functions in the [Object Configuration] dialog box. You can configure the object with basic control features such as [Visible], [Blink] or [Touch].
To prompt a [Object Configuration] dialog box, double-click the log data sheet object. You may also right click the object and select [Object Configuration] in the pop up menu.

Name Designate a name to the object. You cannot use space as object’s name.
Type Indicates the type of object
Style Composed of [Position/Size], [Declutter], [Line/Fill] tabs.
Visible Shows or hides the object according to the tag value.
Blink Blinks in certain cycle according to the tag value.
V/H-Size Changes the size of object vertically/horizontally according to the tag value.
V/H-Move Moves the object vertically/horizontally according to the tag value.
Color Changes the color of object according to the tag value.
Log Data Sheet Opens the log data sheet configuration window

6.4 How to use

Sau khi thực hiện CimonX, bạn có thể sử dụng hộp công cụ để thiết lập thời gian hiển thị dữ liệu của một khoảng thời gian nhất định hoặc lưu dữ liệu dưới dạng tệp excel

7. Chart

Biểu đồ cho phép người dùng thu thập dữ liệu từ nhiều nguồn dữ liệu khác nhau và trực quan hóa dữ liệu để dễ hiểu hơn. Có thể tạo biểu đồ 2D và 3D dựa trên dữ liệu ghi nhật ký. Biểu đồ tương tự như Trend vì bạn cũng có thể tìm kiếm và hiển thị dữ liệu lịch sử.

CIMON-SCADA cung cấp 20 loại biểu đồ bao gồm dạng thanh, tròn, điểm, đường, radar và dạng 3D

7.1 Bar Chart

You may create a bar chart by selecting icon in the Chart configuration window. The bar chart is useful to display time series data or to compare the data between each item. The item is set on the horizontal (X) axis, and data value is set on the vertical (Y) axis.

The bar chart includes the following diagrams shown below.

Stacked Bar Shows comparisons between categories of data, and provides a hint of how the total for each category value is divided into parts.
Full Stacked Bar Shows all data points stacked with a single bar for each category. The
series values are displayed as percentages and the height of each bar is always full.
Manhattan Bar Displays a result of the bar chart as 3D dimension

7.2 Point Chart

Bạn có thể tạo biểu đồ điểm bằng cách chọn biểu tượng trong cửa sổ cấu hình Biểu đồ.
Biểu đồ điểm biểu diễn các thành phần của giá trị dữ liệu bằng các điểm. Biểu đồ này so sánh ít nhất hai tập hợp giá trị hoặc cặp dữ liệu. Biểu đồ này cũng hiển thị mối quan hệ giữa các tập hợp giá trị.

7.3 Line Chart

You may create a line chart by selecting icon in the Chart configuration window. The line chart is ideal for displaying the series of data points over time or continuous intervals. The time or interval data is placed on the horizontal (X) axis, and the value data is placed on the vertical (Y) axis.

The line chart includes the following diagrams shown below.

Step Uses vertical and horizontal lines to connect data values forming a step-like progression.
3D Line Displays a result of the line chart as 3D dimension.
3D Step Displays a result of the step chart as 3D dimension.

7.4 Pie Chart

You can create a pie chart by selecting icon in the Chart configuration window. The pie chart is divided into slices that represent numeral proportion. The arc length of each slice is proportional to the quantity it represents. You may not use the pie chart when the horizontal (X) axis is used as a time axis.

3D Pie: Hiển thị kết quả của biểu đồ hình tròn dưới dạng kích thước 3D

7.5 Area Chart

Bạn có thể tạo biểu đồ vùng bằng cách chọn biểu tượng trong cửa sổ Cấu hình biểu đồ.
Biểu đồ vùng được sử dụng để biểu diễn sự thay đổi trong một hoặc nhiều trường dữ liệu theo thời gian và tương tự như biểu đồ đường.

Stacked Area Shows the contribution of each data to a total over time.
Full Stacked Area Data is recorded to over time as areas and stacked so that the cumulative area always represents 100%.
3D Area Displays a result of the area chart as 3D dimension.
3D Stacked Area Displays a result of the stacked area chart as 3D dimension.
3D Full Stacked Area Displays a result of the 100% stacked area chart as 3D dimension

7.6 Radar Chart

Bạn có thể tạo biểu đồ radar bằng cách chọn biểu tượng trong cửa sổ cấu hình Biểu đồ.
Biểu đồ radar biểu diễn nhiều điểm dữ liệu và so sánh chúng trên lưới cực

Radar Line Shows data values along radial axes originating from the center of the chart. Data points belonging to the same category are connected by a line.
Radar Area Shows data points as a filled area between 0 (center) and the measure value.

Chart Configuration

You can configure the contents and screen of the Chart object. See the following table for the details

Name Designates an object’s name. The name is automatically determined when you empty the text field.
Show Title Shows the title at the upper side of the Chart.
Background Color Sets the Chart object’s background color.
Diagram Color Sets the background color of the Chart screen.
Grid Line Color Assigns the grid color.
Sampling Time Enter the frequency of the Chart which will be investigated and updated.
The time value can be assigned from 1 to 60 (sec).
Time base X-Axis This option converts X-axis to a time axis. Data is acquired for every Sampling time and represented as the Display number. The value can be
assigned from 1 to 60.
You can create the following charts with [Time Base X-Axis] option: bar, full stacked bar, point, line, step line, area, stacked area and full stacked area chart.
You may not change the X-axis to other category when the option is
applied to the object. You cannot also edit the X-axis to time base in an existing Chart object.
Bạn đang xem: Part 6. Phần mềm SCADA Cimon Ultimate Access - Thiết kế đồ họa - Phần 3
Bài trước Bài sau
Đăng nhập
Đăng ký
Hotline: 0904251826
x