Mô tả

Bộ đổi nguồn LED 220VAC sang 24VDC 1.5A Leyu LPV-35-24

35W Waterproof Single Output Switching Power Supply LPV-35 series

Constant voltage design

Universal AC input/Full range

Withstand 300VAC surge input for 5 seconds

Protections: short circuit/ over load/ over voltage

Cooling by free air convection

Small and compact size

Fully encapsulated with IP67 level

Fully isolated plastic case

Class II power unit, no FG

Class 2 power unit

Pass LPS

Suitable for LED lighting and moving sign applications

100% full load burn-in test

Low cost, high reliability

2 year warranty

Model LPV-35-5 LPV-35-12 LPV-35-15 LPV-35-24 LPV-35-36
DC Voltage 5V 12V 15V 24V 36V
Rated Current 5A 3A 2.4A 1.5A 1A
Current Range 0 ~ 6A 0 ~ 3A 0 ~ 2.4A 0 ~ 1.5A 0 ~ 1A
Rated Power 30W 36W 36W 36W 36W
Ripple & Noise 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p
Voltage Tolerance ±6.0% ±5.0%
Line Regulation ±1.0%
Load Regulation ±4.0% ±2.0%
Setup, Rise Time 500ms, 20ms/230VAC   500ms, 20ms/115VAC at full load
Hold Up Time 50ms/230VAC   16ms/115VAC at full load
Voltage Range 90 ~ 264VAC   127 ~ 370VDC
Frequency Range 47 ~ 63Hz
Efficiency 77% 84% 84% 85% 85%
AC Current 1.1A/115VAC   0.57A/230VAC
Inrush Current Cold Start 55A at 230VAC
Leakage Current 0.25mA / 240VAC
Over Load  110 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage  5.75~6.75V 13.8~16.2V 17.25~20.25V 27.6~32.4V 41.4~48.6V
Protection type: Shut down o/p voltage, re-power on to recover
Working Temp. -30 ~ +65℃ (Refer to “Derating Curve”)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temp., Humidity -40 ~ +80℃, 10 ~ 95% RH
Temp. Coefficient ±0.03%/℃ (0 ~ 45℃)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety Standards UL1310 class 2,CAN/CSA No.223-M91,CB IEC61347-2-13, IP67 approved, design refer to TUV EN60950-1
Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P>100M Ohms / 500VDC / 25℃ / 70% RH
EMC Emission Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A,EN61000-3-3
EMC Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, light industry level, criteria A
Dimension 148*40*30mm (L*W*H)
Weight 0.34Kg
Packing 40pcs/14.6Kg/0.63CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4.Derating may not be needed under low input voltage. Please check the static characteristics for more details.
Đăng nhập
Đăng ký
Hotline: 0904251826