Mô tả

Bộ đổi nguồn LED 220VAC sang 12VDC 8.5A Leyu LPV-100-12

100W Waterproof Single Output Switching Power Supply LPV-100 series

Constant voltage design

Universal AC input/Full range

Withstand 300VAC surge input for 5 seconds

Protections: short circuit/ over load/ over voltage

Cooling by free air convection

Small and compact size

Fully encapsulated with IP67 level

Fully isolated plastic case

Suitable for LED lighting and moving sign applications

100% full load burn-in test

Low cost, high reliability

2 year warranty

Model LPV-100-5 LPV-100-12 LPV-100-15 LPV-100-24 LPV-100-36 LPV-100-48
DC Voltage 5V 12V 15V 24V 36V 48V
Rated Current 12A 8.5A 6.7A 4.2A 2.8A 2.1A
Current Range 0-12A 0-8.5A 0-6.7A 0-4.2A 0-2.8A 0-2.1A
Rated Power 60W 102W 100.5W 100.8W 100.8W 100.8W
Ripple & Noise 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p
Voltage Tolerance ±8% ±5%
Line Regulation ±1%
Load Regulation ±6% ±2%
Setup, Rise Time 2000ms, 25ms/230VAC   2000ms, 25ms/115VAC
Hold Up Time 50ms/230VAC   14ms/115VAC at full load
Voltage Range 90~264VAC   47-63Hz; 127~370VDC
AC Current 2.2A/115V   1.2A/230V
Efficiency 80% 85% 87% 88% 88% 89%
Inrush Current Cold Start 75A at 230VAC
Leakage Current 0.25mA/240VAC
Over Load  110-150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage  5.75-6.75V 13.8-16.2V 17.25-20.25V 27.6-32.4V 41.4-48.6V 55.2-64.8V
Protection type: Shut down o/p voltage, re-power on to recover
Working Temp.Humidity -25 ~ +70℃ (Refer to “Derating Curve”) 20-90% RH non-condensing
Storage Temp.Humidity -40℃~+80℃; 10%~95%RH
Temp.Coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz,2G 10min,/1cycle,period for 60min,each along X,Y,Z axes
Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P>100M Ohms / 500VDC / 25℃ / 70% RH
Safety Standard UL8750, CSA C22.2 No.250.13-12, UL879,CSA C22.2 No.207-M89, IP67 approved, design refer to EN60950-1
EMC Standard EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A
Dimension 190*52*37mm(L*W*H)
Weight 0.63kg;20pcs/13.6kg/0.55CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Derating may not be needed under low input voltage. Please check the static characteristics for more details.
Đăng nhập
Đăng ký
Hotline: 0904251826