Bộ đổi nguồn LED 220VAC sang 12VDC 16.5A Leyu LDV-200-12
200W Single Output Waterproof Switching Power Supply LDV-200 series
High efficiency, High reliability, Low cost
Protections: Short circuit/Over load/Over voltage/High temperature
Waterproof grade: IP67
Working Frequency: 65 KHz
Suitable for LED lighten and moving sign applications.
2 years warranty
| SPECIFICATION |
| OUTPUT |
|
| Model |
LDV-200-12 |
LDV-200-24 |
LDV-200-36 |
| DC Voltage |
12V |
24V |
36V |
| Rated Current |
16.5A |
8.3A |
5.5A |
| Current Range |
0-16.5A |
0-8.3A |
0-5.5A |
| Rated Power |
198W |
199W |
198W |
| Ripple & Noise |
150mVp-p |
200mVp-p |
200mVp-p |
| Voltage Tolerance |
±1% |
±1% |
±1% |
| Inlet Stability |
±0.5% |
±0.5% |
±0.5% |
| Load Stability |
±0.5% |
±0.5% |
±0.5% |
| Setup, Rise, Hold Up Time |
200ms,20ms,30ms/230VAC |
| INPUT |
|
| Voltage Range |
180～264 VAC 47～63Hz；255～373VDC |
| AC Current |
1.5A/230VAC |
| Efficiency |
82% |
84% |
85% |
| Inrush Current |
Cold-start current 40A/230VAC |
| PROTECTION |
|
| Over Load |
105%~135% |
| Protection：Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage |
30~32V |
42~44V |
| Protection：Hiccup mode, recovers automatically after fault condition is removed |
| High Tem. |
≥85℃ |
| Protection：cut off the output, recovers automatically after fault condition is removed |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃~+60℃,20%~90%RH |
| Storage Temp., Humidity |
-20℃~+85℃, 10%~95%RH |
| Temp. Coefficient |
±0.03%/℃(0-50℃) |
| Vibration |
10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC |
| STANDARD |
|
| Safety Standard |
EN61347-1 EN61347-2-13 IP67 |
| EMC Standard |
EN55015 EN61547 EN61000-3.4 CLASSB |
| OTHERS |
|
| Dimension |
215*69*43（L*W*H） |
| Weight |
1.3Kg |
| NOTE
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. |
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. |
