-
- Tổng tiền thanh toán:

Part 5. Phần mềm SCADA Cimon Ultimate Access - Graphic Tools
Part 5. Phần mềm SCADA Cimon Ultimate Access - Graphic Tools
1. CimonD Standard Tool
1.1 Items in Standard Tool
Với thanh công cụ này, bạn có thể chọn các lệnh thường dùng nhất trong CimonD. Vào [View] – [Standard Tool] để hiển thị hoặc ẩn thanh công cụ trên menu trên cùng. Khi bạn chạy ứng dụng CimonD, thanh công cụ này sẽ hiển thị trên menu trên cùng theo mặc định. Thanh công cụ này bao gồm ‘Công cụ chỉnh sửa’ và ‘Công cụ thực thi’.
1.1.1 Edit tools
You can use features for editing a graphic page such as [New Page], [Open], [Save] [Copy], etc. Refer to the table below for features and their descriptions.
Item | Description |
New Page | Creates a new graphic page in the project. |
Open | Opens an existing graphic page. |
Save | Saves the currently designing graphic page. |
Save All | Saves all pages. |
Shows the [Print] dialog box. | |
Preview | Shows the [Print Setup] dialog box. |
Cut | Cuts the selected object. |
Copy | Copies the selected object |
Paste | Pastes the cut or copied object. |
Find | Shows a dialog box to find a string. |
Replace | Shows a dialog box to find a string and replace it. |
1.1.2 Execution Tools
Item | Description |
Run CimonX | Runs project with CimonX. |
Project | Shows the dialog box about information or configuration of the current project. |
Database | Shows the [Database] configuration dialog box. |
CimonX Setup | Shows [CimonX Setup] configuration dialog box. |
Network | Shows [Network] configuration dialog box. |
I/O Devices | Shows [I/O Devices] configuration dialog box. |
Alarms | Shows [Alarms] configuration dialog box. |
Security | Shows [Security] configuration dialog box. |
Script | Shows [Script] configuration dialog box. |
ODBC | Shows [ODBC] configuration dialog box. |
Data Logging | Shows {Data Logging} configuration dialog box. |
Hot-key | Shows [Hot-key] configuration dialog box. |
Reports | Shows [Reports] configuration dialog box. |
Scheduler | Shows [Scheduler] configuration dialog box. |
Recipe Editor | Shows [Recipe Editor] dialog box. |
Step Trend | Shows [Step Trend] configuration dialog box. |
Group Editor | Shows [Group Editor] dialog box. |
Trend Panel | Shows [Trend Panel] configuration dialog box. |
Animation Lib. Editor | Shows [Animation Lib. Editor] dialog box. |
Group Scheduler | Shows [Group Scheduler] configuration dialog box. |
Part Editor | Shows [Part Editor] dialog box. |
Comment Table | Shows [Comment Table] configuration dialog box. |
Min Report | Shows [Min Report] configuration dialog box. |
User Log DB | Shows [User Log DB] configuration dialog box. |
Audio Player | Shows [Audio Player] configuration dialog box. |
Dynamic Image | Shows [Dynamic Image] configuration dialog box. |
Fast Trend | Shows [Fast Trend] configuration dialog box |
Help Topics | Shows [CIMON - SCADA Help] window |
2. CimonD Status Tool
[Status Tool] shows the current selection state in CimonD. The status toolbar will contain a short description of the selected object, location of the cursor, and the lock status of
the keyboard.
The status toolbar can be hidden or shown through [View] - [Status Tool]. The Status tool is shown at the bottom of the application as the default setting.
(1) Edits the current project | (2) x=232, y=0 | (3)CAP|NUM|SCRL |
No. | Description | |
(1) | Shows a short description of the menu which is currently selected. | |
(2) | Shows the cursor’s coordinate on the current graphic page. The coordinate is expressed in x and y, in pixel units. If there are objects on the graphic page, the exact coordinates of the object can be acquired by selecting it. |
|
(3) | Shows the lock status of your keyboard. Depending on the keyboard locks such as Caps Lock, Num Lock, and Scroll Lock, corresponding string lights up. |
3. Drawing Tool
3.1 Items in Drawing Tool
The drawing tool is grouped with commands used to drawing basic and advanced objects, which are frequently used in project editing. You can register the toolbar on the menu by selecting [View] – [Drawing Tool].
3.1.1 Basic Object
Item | Description |
Arrow | Selector mode used to select, move and resize objects. You can move around in the graphic page by following steps: 1. Right-click the blank space of graphic page. 2. Drag the mouse to opposite from location you want to move. |
Line | Line tool used to draw lines. |
Rectangle | Rectangle tool used to draw rectangles or squares. |
Rounded Rectangle |
Rounded rectangle tool used to draw rectangles or squares with rounded corners. |
Circle | Circle tool used to draw circle or ellipses. |
Arc | Arc tool used to draw arcs. |
Chord | Chord tool used to draw chords. |
Circular Sector | Circular sector tool used to draw circular sector. |
Polyline | Line tool used to draw polylines. Vertexes are added whenever clicking blank space of the graphic page. To exit drawing mode, double-click the blank space of the graphic pag |
Polygon | Line tool used to draw polygons. Vertexes are added whenever clicking space of the graphic page. To exit drawing mode, double-click the blank space of the graphic page. At this moment, each location clicked the beginning and the end is connected. |
Text | Text tool used to enter text tool. Click the blank space of graphic page when you finish with editing text. You can add a new line with pressing Enter key. |
3.1.2 Advanced Object
Item | Description |
Tag Value | Brings up Tag Value configuration dialog box. This is used to display a current tag value or variable in runtime. |
Button | Brings up Button configuration dialog box. This is used to insert a button for functions such as ‘Open page’, ‘Close page’, ‘Write tag value’, etc. |
Trend | Brings up Trend configuration dialog box. This is used to display currently logging data as trends. YT, Multiple, XY, ST trends are provided. |
Alarm Summary |
Brings up Alarm Summary configuration dialog box. This is used to display summaries of alarm, such as alarm history or alarm status. |
User Event Logging |
Brings up User Event Logging configuration dialog box. This is used to monitoring demanded event logs in runtime. |
Log Data Sheet | Brings up Log Data Sheet object. This is used to display logged data values on the grid. |
Chart | Brings up Chart configuration dialog box. Log data or tag values can be shown in the various charts. |
Page Embedding |
Brings up Page Embedding dialog box. This is used to insert the other graphic page objects in current page. |
Part | Brings up Part selection dialog box. Includes part objects that had been edited in part editor. |
Switch/Lamp | Brings up Switch/Lamp configuration dialog box. This is used to insert switches that operates in various touch conditions. |
Comment | Brings up Comment configuration dialog box. This is used to utilize settings in the comment table. |
RTGraph | Brings up RTGraph configuration dialog box. This is used to insert the realtime graph in the graphic page. |
Dynamic Image | Brings up Dynamic Image configuration dialog box. This is used to display different images according to registered tag values. |
Library | Brings up Library selection dialog box. Library provides numerous graphic images such as engine, gauge, flowmeter, etc |
4. Font Tool
The Font Toolbar contains commands about font type, size, style and alignments. You can add this toolbar to the top menu at [View] – [Font Tool].
You can change the properties of an object’s strings with this toolbar. Font properties are applied to any objects’ strings according to the font setup. To apply the settings, strings have to exist in the object.
4.1. Font Type
Bạn có thể kiểm tra toàn bộ danh sách các kiểu phông chữ được cài đặt trong PC của bạn. Các kiểu phông chữ này có thể được áp dụng cho các chuỗi đối tượng. Kiểu phông chữ mặc định là Gulim. Để thay đổi kiểu phông chữ, bạn có thể chọn một kiểu từ danh sách hoặc nhập kiểu phông chữ theo cách thủ công vào hộp kết hợp.
Các kiểu phông chữ có dấu At(@) ở phía trước được viết theo chiều dọc.
Nếu bạn đã nhập sai kiểu phông chữ hoặc phông chữ chưa được cài đặt trong PC của bạn, kiểu phông chữ sẽ không thay đổi. Kiểu phông chữ cuối cùng được chọn sẽ được áp dụng cho chuỗi.
4.2 Font Size
Bạn cũng có thể thay đổi kích thước phông chữ bằng cách phóng to hoặc thu nhỏ kích thước của đối tượng
4.3 Font Style
Có ba loại kiểu phông chữ có thể áp dụng cho các chuỗi. Nhiều kiểu có thể được áp dụng cho một chuỗi duy nhất.
Bold | Makes the string bold or unbold. |
Underline | Underlines the string or deletes the underline. |
Italic | Slants the string or makes the string upright |
4.4 Font Alignment
Type | Description |
Left Alignment | Aligns the string to the left side of the object. |
Center Alignment | Aligns the string to the center of the object. |
Right Alignment | Aligns the string to the right side of the object |
5. Color Tool
The pop-up window appears when you select [Color Tool] on the [View] menu. You can choose line color, line and fill styles of the selected basic objects. The settings on the color tool are assigned to newly created basic objects by default.
5.1 Palette
You can change the basic object’s line color. Followings are the features that can be utilized in the color palette
Basic Color | Provides standard colors. It applies user’s selection on the line color. A color palette dialog box appears when the cell has been selected. User can define the color through the color palette. |
User Defined Color | Color tool allows you to define custom colors and add them to your palette. A color palette dialog box appears when the cell has been selected. User can define the color through the color palette |
5.2 Line Style
You can change the basic object’s line style, such as solid line, dotted line, etc
5.3 Fill Style
5.4 Preview
The preview area shows an example of the basic object with currently selected color, line style and fill style.
5.5 Transparent
This feature allows a basic object to display line and fill style. The background color is transparent. The following table demonstrates with instructions and examples
5.6 Show Standard Color
Bảng màu chuẩn được mở rộng khi bạn đánh dấu vào hộp kiểm [Show Standard Color]. Bạn có thể kiểm tra thông tin RGB từ biểu tượng.
Sau khi chọn ô trong [Basic Color] hoặc [User Defined Color], hãy nhấp vào biểu tượng trong [Standard Color] và kéo nó vào bảng màu mà bạn muốn thay đổi. Màu của ô sẽ được đặt thành màu bạn đã chọn.
6. Arrange Tool
The toolbar consists of commands such as object groupage, object ordering, etc. You can add this toolbar to the top menu at [View] – [Arrange Tool]
6.1 Groupage/Ordering
Item | Description |
Group | This feature is enabled when more than two objects are selected. Selected objects will be grouped and operate as a single object. |
Ungroup | This feature is enabled when you select a group object. The selected group object will be broken into the individual objects it was made from. |
Bring to Front | This feature operates by placing the selected object in front of all other objects. If the object is layered upon other objects, the selected object may partially cover the other objects. |
Send to Back | This feature operates by placing the selected object behind of all other objects. If the object is layered under other objects, the selected object may be partially covered by the other objects. |
6.2 Arrange
Tính năng này được bật khi bạn chọn hai hoặc nhiều đối tượng. Các đối tượng có thể được căn chỉnh theo hướng trên cùng hoặc dưới cùng, bên trái hoặc bên phải và theo hướng giữa, ngang hoặc dọc. Tham khảo bảng bên dưới để biết các lệnh và ví dụ.
Align Left | This feature is enabled when you select two or more objects. It will align the left edge of the selected objects with the left edge of the last selected object. (The object which color is gray in the example). |
Align Right | This feature is enabled when you select two or more objects. It will align the right edge of the selected objects with the right edge of the last selected object. |
Align Top | This feature is enabled when you select two or more objects. It will align the top edge of the selected objects with the top edge of the last selected object. |
Align Bottom | This feature is enabled when you select two or more objects. It will align the bottom edge of the selected objects with the bottom edge of the last selected object. |
6.3 Resize
Tính năng này được bật khi bạn chọn hai hoặc nhiều đối tượng. Bạn có thể thay đổi kích thước các đối tượng đã chọn theo chiều rộng và/hoặc chiều cao. Tham khảo bảng bên dưới để biết các lệnh và ví dụ.
Same Width | This feature is enabled when you select two or more objects. It resizes the width of selected objects to the width of the last selected object. (The object which color is gray in the example) |
Same Height | This feature is enabled when you select two or more objects. It resizes the height of the selected objects to the height of the last selected object. |
Same Size | This feature is enabled when you select two or more objects. It resizes the width and height of the selected objects to the width and height of the last selected object |
6.4 Spacing
Tính năng này được bật khi bạn chọn ba đối tượng trở lên. Bạn có thể phân bổ khoảng cách giữa các đối tượng đã chọn theo chiều ngang hoặc chiều dọc. Tham khảo bảng bên dưới để biết các lệnh và ví dụ.
Space Horizontal |
This feature is enabled when you select three or more objects. Evenly spaces all selected objects horizontally between the left most and right most selected objects. |
Space Vertical | This feature is enabled when you select three or more objects. Evenly spaces all selected objects vertically between the top most and bottom most selected objects |
6.5 Rotation/Flip
Tính năng này được bật khi bạn chọn một hoặc nhiều đối tượng. Bạn có thể xoay hoặc lật các đối tượng đã chọn. Tham khảo bảng bên dưới để biết các lệnh và ví dụ
90’ Clockwise | This feature is enabled when you select one or more objects. It rotates the selected objects 90 degrees clockwise based on the center point. |
90’ CounterClockwise | This feature is enabled when you select one or more objects. It rotates the selected objects 90 degrees counter clockwise based on the center point. |
Horizontal | This feature is enabled when you select one or more objects. It flips the selected objects horizontally based on the center point of the X axis. |
Vertical | This feature is enabled when you select one or more objects. It flips the selected objects vertically based on the center point of Y axis. |
6.6 Reshape
Tính năng này được bật khi bạn chọn một đối tượng đơn giản. Bạn có thể thay đổi hình dạng của các đối tượng đồ họa đơn giản: Đường thẳng, hình chữ nhật, cung tròn, cung tròn, dây cung, đường đa giác, đa giác.
Khi bạn chọn một đối tượng, biểu tượng được bật và bạn có thể thay đổi hình dạng của đối tượng bằng cách kéo các tay cầm của nó.