Bộ đổi nguồn tổ ong 36~72VDC sang 24VDC 5A Leyu SD-120C-24

Chia sẻ:
Mã sản phẩm: SD-120C-24
Thương hiệu: Leyu
Tình trạng:

Bộ đổi nguồn tổ ong 36~72VDC sang 24VDC 5A Leyu SD-120C-24

Liên hệ
Mô tả

Bộ đổi nguồn tổ ong 36~72VDC sang 24VDC 5A Leyu SD-120C-24

120W Single Output DC-DC Converter SD-120 series

2:1 wide input range

Protections: Short circuit / Overload / Over voltage

1500VAC I/O isolation

Built-in EMI filter, low ripple noise

100% full load burn-in test

Fixed switching frequency at 83 KHz

24V and 48V input voltage design refer to LVD

Low cost High reliability

2 years warranty

SPECIFICATION
OUTPUT  
Model SD-120B-5 SD-120C-5 SD-120D-5 SD-120B-12 SD-120C-12 SD-120D-12 SD-120B-24 SD-120C-24 SD-120D-24 SD-120B-48 SD-120C-48 SD-120D-48
DC Voltage 5V 12V 24V 48V
Rated Current 24A 10A 5A 2.5A
Current Range 0~24A 0~10A 0~5A 0-2.5A
Rated Power 120W 120W 120W 120W
Ripple & Noise 100mVp-p 120mVp-p 150mVp-p 150mVp-p
Voltage  Adj. Range 4.5~5.5VDC 11~16VDC 23~30VDC 43.2-52.8VDC
Voltage Tolerance ±2.0% ±1.0% ±1.0% ±1.0%
Line Regulation ±0.5% ±0.3% ±0.2% ±0.2%
Load Regulation ±0.5% ±0.3% ±0.2% ±0.2%
Setup, Rise Time 2s,50ms(only D mode) at full load
Hold Up  Time 20ms(only D mode) at full load
INPUT  
Voltage Range B:19~36VDC   C:36~72VDC   D:72~144VDC or 85~132VAC
Efficiency 74% 75% 76% 75% 77% 80% 78% 81% 83% 78% 81% 83%
DC Current 4.8A/24V 2.4A/48V 1.8A/96V 4.8A/24V 2.4A/48V 1.8A/96V 4.8A/24V 2.4A/48V 1.8A/96V 4.8A/24V 2.4A/48V 1.8A/96V
Inrush Current D:18A/96VDC
Leakage Current <0.75mA/120VAC(SD-100D)
PROTECTION  
Over Load  105~135% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage  5.75~6.75V/10%load 16.8~20V/10%load 31.5~37.5V/10%load 60.2-79.2/10%load
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT  
Working Temp. -10~+60℃ (Refer to “Derating Curve”)
Working Humidity 20~90%RH non-condensing
Storage Temp.,Humidity -20~+85℃,10~95%RH
Temp.Coefficient ±0.03%/℃ (0~50℃)
Vibration 10~500Hz,2G 10min./1cycle,60min.each along X, Y, Z axes
SAFETY &EMC  
Safety  Standards IEC60950-1CB approved by TUV(for D type only)
Withstand Voltage I/P-O/P:1.5KVAC   I/P-FG:1.5KVAC   O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25℃ /70%RH
EMC Emission Compliance to EN55022(CISPR22) Class B
EMC Immunity Compliance to EN61000-4-2,3,4,6,8,light industry level,criteria A
OTHERS  
Dimension 199*98*38mm(L*W*H)
Weight 0.55Kg
Packing 30pcs/16.5Kg
NOTE  
1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Đăng nhập
Đăng ký
Hotline: 0904251826
x