-
- Tổng tiền thanh toán:
Non-Isolated DC/DC Converter
Khi mua hàng tại website của chúng tôi, quý khách sẽ được:
Bộ đổi nguồn 10~44VDC sang 24VDC 30A, 720W Leyu WG10-44S2430
The WG10-44S2430 is a Non-isolated DC-DC converter that uses a synchronous rectification technology, and features high efficiency and power density. It has the dimensions of 140mm x 120mm x 42.5mm (5.51 in. x 4.72 in. x 1.67 in) and provides the rated output voltage of 24V and the maximum output current of 30A.
Features
● Design meeting RoHS / CE
● High efficiency: 95.3% (@12Vin, 25℃)
● Non-isolated between input and output
● 100% full stable current output
● Support -40 °C environment
● 100% full load burn-in test
● OT, OL, LV protections
● Waterproof level IP67
Parameter | Min. | Typ. | Max. | Units | Remarks |
Absolute maximum ratings | |||||
Operating ambient temperature |
-40 | - | +55 | °C | |
Shell ambient temperature |
-40 | - | 80 | °C | |
Storage temperature | -55 | - | 100 | °C | |
Operating humidity | 5 | - | 95 | % | Non-condensing |
Atmospheric pressure | 62 | - | 106 | Kpa | |
Altitude | - | - | 4000 | m | |
Cooling way | - | - | - | Natural cooling | |
Input characteristics | |||||
Input voltage | 10 | 12/24/36 | 44 | V | - |
Max. input voltage | - | - | 45 | V | Continuous |
Undervoltage shutdown | 8 | 9 | 10 | V | Automatic recovery |
Undervoltage recovery | 10 | 10.5 | 11 | V | Automatic recovery |
Max. input current | - | - | 78 | A | Vin =10V; Iout =30A |
No load current | - | 150 | 180 | mA | Vin =12V |
Positive electrode cable | 4 | - | - | AWG | If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter. |
Negative electrode cable | 4 | - | - | AWG | |
Enable PIN cable | - | NA | - | AWG | If the product has this feature |
Fuse | - | 120 | - | A | Input positive has built-in fuse |
Output characteristics | |||||
Efficiency | - | 95.3 | - | % | Vin =12V; Iout =30A |
Output voltage | 23.9 | 24 | 24.3 | V | Vin =12V; Iout =30A |
Regulator accuracy | - | ±2 | - | % | |
Voltage regulation | - | ±2 | - | % | |
Load Regulation | - | ±2 | - | % | |
Overvoltage protection | - | NA | - | V | |
Output current | 0 | - | 30 | A | Vin =10-44V |
Overcurrent protection | 29 | 30 | 31 | A | Vin=12V |
External capacitance | - | NA | - | µF | Don’t need |
Output ripple and noise | - | 201 | 400 | mVp-p | Vin =10-44V; Iout=30A, Oscilloscope bandwidth: 20 MHz |
Output voltage rise time | - | 515 | 600 | ms | |
Boot delay time | - | 1.2 | 3 | ms | |
Out voltage overshoot | - | 2 | 3 | % | Vin =12V, 50%-75% Load step |
Over temperature protection |
- | - | 98 | °C | Shell temperature |
Short circuit protection | - | YES | - | Long-term (4 hours) short circuit is not damaged, Hiccup mode |
|
Positive electrode cable | 12 | - | - | AWG | If the wire length is greater than 50cm, it is recommended to use a thicker wire diameter |
Negative electrode cable | 12 | - | - | AWG | |
Safety and EMC features | |||||
Anti-electric Strength | Input to Output | - | V | Leakage current ≤ 3.5mA, 1min, no breakdown, no arcing |
|
Input to Shell | ≥500 | V | |||
Output to Shell | ≥500 | V | |||
Insulation resistance | Input to Output | ≥10 | MΩ | Test voltage = 500V | |
Input to Shell | |||||
Output to Shell | |||||
Other characteristics | |||||
Weight | ≤ 1.2 | kg | |||
Package | White box | ||||
MTBF | ≥200,000 | H | Vin= 12V; Iout= 30A | ||
Switching frequency | 130±10 | KHz |