Cảm biến đo độ pH chất lỏng Rika RK500-12

Mã sản phẩm: RK500-12

Thương hiệu: Rika

Tình trạng:

RK500-12 Liquid PH Sensor Water Quality Monitoring Sensor

Liên hệ

Chính sách cửa hàng

Khi mua hàng tại website của chúng tôi, quý khách sẽ được:

Thanh toán dễ dàng và bảo mật

Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

Bảo hành 1 năm do lỗi nhà sản xuất

Cam kết 100% chính hãng

GIẢI PHÁP

Mô tả

Mô tả

Cảm biến đo độ pH chất lỏng Rika RK500-12

PRODUCT DESCRIPTION

RKk500-12 PH sensor is a good solution to measure the PH value. It does not require a professional calibration instrumentand is simple to operate. lt can be used to continuously measure the PH value of wastewater . It is suitable for agriculture,sewage treatment plants, chemical industry, printing and dyeing, papermaking, pharmaceuticals. , electroplating and environmental protection.

SPECIFICATIONS

Item	Technical Specification
Measurement Principle	Electrochemistry
Range	0-14PH
Supply	7-30VDC(power consumption<0.2W)
Accuracy	±0.05PH
Resolution	0.01PH
Temperature Compensation	Temperature compensation is optional
Response time	<8s(flowing liquid), <14s(stationary liquid)
Stability	≤0.01PH/24h
Output Signal	4-20mA & RS485 at the same time
Calibration Cycle	Every 6 month(General water ) Every 3 month or shorter(Seriously polluted water )
Operating Environment	0-+80℃(<0.6MPa), high pressure is customizable
Cable length	5m(default),customizable
Ingress Protection	IP68
Storage	10-60℃@20%-90%RH

PH SCALE
PH value	Description	PH value	Description
<4.5	Strongly acidity	7.5-8.5	Faintly alkalinity
4.5-5.5	Acidity	8.5-9.5	Alkalinity
5.5-6.5	Faintly acidity	>9.5	Strongly alkalinity
6.5-7.5	Neutral

DIMENSION

Type A

Universal type ABS housing, Up and down are NPT3/4 threads

RK500-12 Liquid PH Sensor Water Quality Monitoring Sensor 14

Type B

Highly corrosion resistant PPS housing, Up and down are NPT3/4 threads

RK500-12 Liquid PH Sensor Water Quality Monitoring Sensor 16

Type C

Standard glass type Length=120mm

RK500-12 Liquid PH Sensor Water Quality Monitoring Sensor 15

Unit:mm

RK500-12 Liquid PH Sensor Water Quality Monitoring Sensor 17

ELECTRODE MAINTENANCE & INSTALLATION AND FIXED

PH electrode is not used at ordinary times and can be soaked in 3mol/l KCL solution or saturated KCL solution. It is strictly prohibited to immerse the electrode in distilled water and deionize the water or tap water with minimal plasma content.If the PH electrode is contaminated with inorganic substances, it can be cleaned with 0.1mol/l Hcl or NaOH solution for a few minutes and then washed with distilled water. If the PH electrode is contaminated with organic substances, it can be cleaned with alcohol or acetone and then cleaned with distilled water.(note: the protective cap before the electrode should be removed when using);

Clean the electrode with tap water every 3 months or 6 months according to the working environment.

Mounting bracket(length=1m) is optional

RK500-12 Liquid PH Sensor Water Quality Monitoring Sensor 18