Bộ đổi nguồn tổ ong 220VAC sang 5VDC 7A Leyu MS-35-5
35W Single Output Switching Power Supply MS-35 series
Low price and high reliability
105℃ output capacitor
AC input power suitable for the world
Hight efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With Short-circuit and overload protection
Compact size,light weight
100% full-load burning test
Installed with EMI filter, minimum wave
| SPECIFICATIONS |
| OUTPUT |
|
| Model |
MS-35-5 |
MS-35-12 |
MS-35-24 |
| DC Voltage |
5V |
12V |
24V |
| Rated Current |
7A |
3A |
1.4A |
| Current Range |
0-3A |
0-3A |
0-1.4A |
| Rated Power |
35W |
36W |
33.6W |
| Ripple & Noise |
50mVp-p |
50mVp-p |
100mVp-p |
| Voltage Adj. Range |
+10,-5% |
±10% |
±10% |
| Voltage Tolerance |
±2% |
±1% |
±1% |
| Inlet Stability |
±0.5% |
±0.5% |
±0.5% |
| Load Stability |
±1% |
±0.5% |
±0.5% |
| Setup, Rise, Hold Up Time |
200s,100ms,30ms at full load |
| INPUT |
|
| Voltage Range |
100~240VAC 47-63Hz; 240~370VDC |
| AC Current |
0.5A/115V 0.25A/230V |
| Efficiency |
65% |
68% |
72% |
| Inrush Current |
Cold-start current 15A/115V 30A/230V |
| Leakage Current |
<0.5mA/240VAC |
| PROTECTION |
|
| Over Load |
105%~150% |
| Protection type: Fold back current limiting Reset: auto recovery |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃~+60℃(Refer to output derating curve), 20%~90%RH |
| Storage Temp., Humidity |
-20℃~+85℃,10%~95%RH |
| Temp. Coefficient |
±0.02%/℃(0~50%) |
| Vibration |
10~500Hz,2G 10min,/1cycle,Period for 60min,each axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC |
| STANDARD |
|
| Safety Standard |
Meet UL1012 requirement(Not apply for the mark) |
| EMC Standard |
Meet FCC PART15 J Conduction class B |
| OTHERS |
|
| Dimension |
85*58*38mm(L*W*H) |
| Weight |
0.4Kg |
| NOTE |
|
| 1.The testing condition for the parameter above is: 230VAC input, rated load, 25℃ 70% RH.Humidity.
2.Error.include the setting error,line stability and load stability.
3.Wave test:adopting “A12”double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%. |
