Bộ đổi nguồn tổ ong 220VAC sang 5VDC 2A + 12VDC 1A + -5VDC 0.5A Leyu T-30A
30W Triple Output Switching Power Supply T-30 series
High efficiency, high reliability, low cost
AC input range selected by switch
Protections: Short circuit/ Over load
LED indicator for power on
Cooling by free air convection
Fixed switch frequency at 23KHz
2 years warranty
| SPECIFICATIONS |
| OUTPUT |
|
| Model |
T-30A |
T-30B |
| Output number |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
| DC Voltage |
5V |
12V |
-5V |
5V |
12V |
-12V |
| Rated Current |
3A |
1A |
0.5A |
3A |
1A |
0.5A |
| Current Range |
0.5-3A |
0.1-1A |
0.1-0.5A |
0.5-3A |
0.1-1A |
0.1-0.5A |
| Rated Power |
30W |
33W |
| Ripple & Noise |
50mVp-p |
100mVp-p |
50mVp-p |
50mVp-p |
100mVp-p |
100mVp-p |
| Voltage Adj. Range |
CH1: -5%, +10% |
CH1: -5%, +10% |
| Voltage Tolerance |
±2% |
+2%,-6% |
+2%,-10% |
±2% |
+2%,-6% |
±6% |
| Setup, Rise, Hold Up Time |
200ms,100ms,30ms at full load |
| INPUT |
|
| Voltage Range |
85~132VAC/170~264VAC selected by switch 47~63Hz; 40~370VDC |
| AC Current |
0.8A/115V 0.45A/230V |
| Efficiency |
70% |
72% |
| Inrush Current |
Cold start 18A/115V 36A/230V |
| Leakage Current |
<0.5mA/240VAC |
| PROTECTION |
|
| Over Load |
105%~150% |
| Protection type: shut down O/P voltage, re-power on to recover |
| ENVIRONMENT |
|
| Working Temp., Humidity |
-10℃~+60℃; 20%~90%RH |
| Storage Temp., Humidity |
-20℃~+85℃; 10%~95%RH |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
|
| Withstand Voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| STANDARD |
|
| Safety Standard |
Design refer to UL 1012 |
| EMC Standard |
Design refer to FCC Part15 J Conduction Class A |
| OTHERS |
|
| Dimension |
129*98*38mm(L*W*H) |
| Weight |
0.42Kg |
| Packing |
45pcs/13.6Kg/0.86CUFT |
| NOTE |
|
| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation |
