Mô tả

Bộ đổi nguồn tổ ong PFC 220VAC sang 12VDC 16.7A Leyu SP-200-12

200W Single Output with PFC Function SP-200 series

·Universal AC input/ full range

·Built-in active PFC function,PF>0.93

·100% full load burn-in test

·Protections: Short circuit/ Over load/ Over voltage/ Over temperature

·Built-in constant current limiting circuit

·LED indicator for power on

·Fixed switching frequency at PFC: 7KHz  PWM:134 KHz

·2 years warranty

Model SP-200-5 SP-200-7.5 SP-200-12 SP-200-13.5 SP-200-15 SP-200-24 SP-200-27 SP-200-48
DC Voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V
Rated Current 40A 26.7A 16.7A 14.9A 13.4A 8.4A 7.5A 4.2A
Current Range 0-40A 0-26.7A 0-16.7A 0-14.9A 0-13.4A 0-8.4A 0-7.5A 0-4.2A
Rated Power 200W 200.2W 200.4W 201.1W 201W 201.6W 202.5W 201.6W
Ripple & Noise 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
DC Adjustment Range -5%,+10% -5%,+10% -5%,+10% -5%,+10% -5%,+10% -5%,+10% -5%,+10% -5%,+10%
Voltage Tolerance ±2% ±2% ±2% ±2% ±2% ±1% ±1% ±1.0%
Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation ±1% ±1% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Setup, Rise, Hold Up Time 600ms,40ms,20ms at full load
Voltage Range 85~264 VAC  47-63Hz;120~370VDC
AC Current 3.5A/115 VAC  1.7A/230VAC
Power Factor PF>0.93/230VAC,PF>0.97/115VAC at full load
Efficiency 71% 76% 79% 80% 81% 83% 83% 84%
Inrush Current Cold start 50A/230VAC
Leakage Current <2mA/240VAC
Over Load  105%-150% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage  110%~135%
Protection type: Shut down o/p voltage, re-power on to recover
Over Temp.  80±5℃ (TWS1:detect on heatsink of power transistor)
Protection type: shutdown o/p voltage, recovers automatically after temperature goes down
Remote Control (option) CN3:4~10VDC POWER OFF, <0~0.8VDC POWER ON
Working Temp. Humidity -10℃~+60℃; 20%~90% RH non-condensing
Storage Temp. Humidity -20℃~+85℃; 10%~95% RH
Temp. Coefficient ±0.05%/℃(0~50℃)
Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
Withstand Voltage I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25℃/70% RH
Safety Standard Design refer to UL60950-1,TUV EN60950-1, CCC
EMC Standard Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024, light industry level, criteria A
Dimension 199*99*50mm (L*W*H)
Weight 0.85Kg/pc; 20pcs/17.9kg/1.28CUFT
NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Đăng nhập
Đăng ký
Hotline: 0904251826