Bộ đổi nguồn tổ ong PFC 220VAC sang 24VDC 6.3A Leyu SP-150-24
150W Single Output with PFC Function SP-150 series
Features:
·Universal AC input/ full range
·Built-in active PFC function, PF>0.93
·100% full load burn-in test
·Protections: Short circuit/ Over load / Over voltage/
Over temperature
·Built- in constant current limiting circuit
·LED indicator for power on
·Remote ON-OFF control (Optional)
·Fixed switching frequency at PF: 67KHzPWM: 134 KHz
·2 years warranty
|
SPECIFICATIONS |
|
OUTPUT |
|
|
Model |
SP-150-5 |
SP-150-7.5 |
SP-150-12 |
SP-150-13.5 |
SP-150-15 |
SP-150-24 |
SP-150-27 |
SP-150-48 |
|
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
|
Rated Current |
30A |
20A |
12.5A |
11.2A |
10A |
6.3A |
5.6A |
3.2A |
|
Current Range |
0-30A |
0-20A |
0-12.5A |
0-11.2A |
0-10A |
0-6.3A |
0-5.6A |
0-3.2A |
|
Rated Power |
150W |
150W |
150W |
151.2W |
150W |
150W |
151.2W |
153.6W |
|
Ripple&Noise |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
150mVp-p |
150mVp-p |
250mVp-p |
|
DC Adjustment Range |
-5%，+10% |
-5%，+10% |
-5%，+10% |
-5%，+10% |
-5%，+10% |
-5%，+10% |
-5%，+10% |
-5%，+10% |
|
Voltage Tolerance |
±2% |
±2% |
±2% |
±2% |
±2% |
±1% |
±1% |
±1.0% |
|
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Load Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Setup,Rise,Hold Up Time |
600ms,30ms,20ms at full load |
|
|
|
|
INPUT |
|
|
Voltage Range |
85～264 VAC47-63Hz；120～370VDC |
|
AC Current |
2.5A/115 VAC1.2A/230VAC |
|
Power Factor |
PF>0.93/230VAC,PF>0.98/115VAC at full load |
|
Efficiency |
75% |
79% |
80% |
80% |
81% |
83% |
84% |
84% |
|
Inrush Current |
Cold start 40A/230VAC |
|
Leakage Current |
<2mA/240VAC |
|
|
|
|
PROTECTION |
|
|
Over Load |
105%-150% |
|
Protection type: Constant current limiting, recovers automatically after fault condition is removed |
|
Over Voltage |
110%~135% |
|
Protection type: Shut down o/p voltage, re-power on to recover |
|
Over Temp. |
TSW1(Power transistor) When temp.in 95±5 ℃ shutdown o/p voltagetemp. ＜95±5 ℃O/I auto-recovery. |
|
|
|
|
ENVIRONMENT |
|
|
Working Temp.Humidity |
-10℃~+50℃; 20%~90%RH |
|
Storage Temp.Humidity |
-20℃~+85℃; 10%~95%RH |
|
Temp.Coefficient |
±0.03%/℃(0～50℃) |
|
Vibration |
10～500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
|
|
|
|
SAFETY |
|
|
Withstand Voltage |
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
|
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC |
|
|
|
|
STANDARD |
|
|
Safety Standard |
Design refer to UL1950,TUV EN60950 |
|
EMCStandard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
|
|
|
|
OTHERS |
|
|
Dimension |
199*99*50mm（L*W*H） |
|
Weight |
0.75Kg |
|
|
|
|
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
