Switch công nghiệp quản lý 4 cổng quang + 16 cổng Ethernet Maiwe MISCOM6220-4F
MISCOM6220-4F series is layer 2 managed DIN-rail industrial Ethernet switch, supports 4×100Base-FX ports and 16×10/100Base-T(X) ports. It can automatically detect data packet errors, reduces transmission failures, and easily supports 100M networking, ensuring stable, reliable, and efficient data transmission.
The products are built with industrial-grade components, feature standard 35mm DIN-rail mounting, have a high-strength metal casing for durability, and utilize fanless heat dissipation. They can operate in a wide temperature range from -40°C to +75°C.
MISCOM6220-4F series can be managed through WEB or SNMP, while providing a series of commonly used advanced management functions such as MW-Ring, ERPS, STP/RSTP, VLAN, LACP, LLDP, RMON, ACL, QoS, 802.1X, IGMP Snooping, WEB/TELNET/SSH control, port aggregation, port mirroring, static MAC address forwarding table, network diagnostic, loopback detection, email/delay fault alarms and firmware online upgrades. This product can be widely used in industrial fields such as comprehensive energy, smart cities, intelligent transportation, smart factories, and industrial automation.
Tính năng
- Support ring network redundancy protocol such as MW-Ring, ERPS and STP/RSTP to improve the network reliability
- Fast ring network redundancy<20ms(MW-Ring) to enhance the reliability of the system communication
- Support QoS (Quality of Service) with prioritization mapping based on 802.1P/DSCP/port, improving communication quality
- Support single AC85~264V/DC110~370V power supply or dual DC9~60V power input optional
- With IP40 high strength aluminum alloy shell and fanless design, the device can reliably work in harsh industrial environment ranging from -40°C to +75°C
Thông số kỹ thuật
|
Software |
|
Switching |
Support port configuration, such as port speed, duplex mode, flow control, maximum transmission unit, and etc.
Support 802.1Q VLAN and port isolation
Support port speed limit, storm suppression, storm detection, static port aggregation, LACP
Support MAC address aging and static unicast MAC address binding |
|
Redundancy |
Support MW-Ring/MW-RingV2 private ring network technology
Support ERPS
Support RSTP and compatible with STP |
|
Multicast |
Support IGMP snooping
Support static multicast MAC address binding |
|
Security Management |
Support WEB, TELENT, SSH control
Support ACL and filters data of L2-L4 layers
Support 802.1X port authentication
Support relay alarms and email logs
Support loop back detection |
|
Management and Maintenance |
Support QoS service quality, 802.1P/DSCP/port priority mapping, absolute and relative priority control
Support SNMP v1/v2c/v3, LLDP, RMON, private MIB and Trap
Support port mirroring and ping
Support user permission management, system logs, SNTP client
Support online restart, factory reset, system upgrade, and configuration file upload/download
Support unified upper computer software management |
|
Switch Capability |
|
Processing Type |
Store-and-Forward |
|
Backplane Bandwidth |
12.8Gbps |
|
Buffer Size |
4.1Mbit |
|
MAC Table Size |
8K |
|
Interface |
|
100M Fiber Port |
4x100Base-FX ports (SC/FC/ST, single mode/multimode, wavelength and transmission distance are optional) |
|
100M Copper Port |
16x10/100Base-T(X) auto-sensing RJ45 ports, support full/half duplex and auto MDI/MDI-X |
|
Relay |
1 relay alarm output, 3.81mm pitch 3-pin terminal block |
|
CONSOLE |
1 CONSOLE port with a RJ45 connector, supporting RS232 signal for device debugging and command configuration |
|
Status LED |
Power indicator, operation indicator, alarm indicator, interface indicator, and port rate indicator |
|
Power Supply |
|
Input Voltage |
DC model: Dual DC9~60V power input, anti-reverse connection
AC model: Single AC85~264V/DC110~370V power supply |
|
Power Consumption |
＜12W@DC24V(full load) |
|
Connection |
5.08mm pitch 2-pin terminal block |
|
Protection |
Built-in over-current protection |
|
Physical Characteristics |
|
Dimensions |
160×74×122 mm (DIN rail mounting clip excluded) |
|
Installations |
Easy installation on 35mm DIN rails |
|
IP Code |
IP40 |
|
Weight |
About 1.2kg |
|
Working Environment |
|
Operating Temp |
-40℃~+75℃ |
|
Storage Temp |
-40℃~+85℃ |
|
Relative Humidity |
5%~95% (non-condensing) |
|
Industry Standard |
|
EMC |
IEC 61000-4-2 (ESD): Level 4
IEC 61000-4-5 (Surge): Level 4
※Ethernet port supports 6kV lighting protection
IEC 61000-4-4 (EFT): Level 4 |
|
Certification |
CE, FCC, RoHS |
Download
Datasheet
User Manual
Thông tin đặt hàng
|
Standard Model |
100M Fiber Port |
10/100M Copper Port |
Input Voltage |
|
MISCOM6220-4F |
4 |
16 |
Dual DC9~60V power input |
|
MISCOM6220-4F-AD220 |
4 |
16 |
Single AC85~264V/DC110~370V power supply |
