Bộ sạc ắc quy tự động 220VAC sang 54VDC 0.5A Leyu ADD-155C
155W Dual Output with Battery Charger (UPS Function) ADD-155 series
Features:
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Battery low protections
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 45 KHz
2 year warranty
|
SPECIFICATION |
|
|
MODEL |
ADD-155A |
ADD-155B |
ADD-155C |
|
|
OUTPUT |
|
|
|
|
|
Outputnumber |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
CH1 |
CH2 |
CH3 |
|
|
DC voltage |
13.8V |
5V |
13.3V |
27.6V |
5V |
27.1V |
54 V |
5 V |
53.5 V |
|
|
Rated Current |
9.5A |
3A |
0.5A |
3A |
3A |
0.5A |
0.2A |
4.5A |
2.3A |
|
|
Current Range |
0~10.5A |
0~3A |
-------- |
0~5A |
0~3A |
--------- |
0~2.5A |
0~3A |
--------- |
|
|
Rated Power |
152.75W |
152.75W |
149.9W |
|
|
Ripple&Noise |
150mVp-p |
100mVp-p |
-------- |
200mVp-p |
100mVp-p |
------- |
200mVp-p |
100mVp-p |
-------- |
|
|
Voltage Adj.Range |
CH1:12~14.5V |
CH1:24~29V |
|
|
|
Voltage Tolerance |
±2.1% |
±0.5% |
-------- |
±1.0% |
±0.5% |
-------- |
±1.0% |
±5.0% |
-------- |
|
|
Line Regulation |
±1.0% |
±2.0% |
-------- |
±1.0% |
±2.0% |
-------- |
±1.0% |
±0.5% |
-------- |
|
|
Load Regulation |
±1.0% |
±3.0% |
-------- |
±1.0% |
±3.0% |
-------- |
±1.0% |
±2.0% |
-------- |
|
|
Setup,Rise Time |
1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load |
|
Hold UpTime |
24ms/230VAC 20ms/115VAC at full load |
|
|
|
|
INPUT |
|
|
Voltage Range |
88~264VAC47~63Hz; 124~370VDC |
|
AC Current |
2.5A/115VAC 1.5A/230VAC |
|
Efficiency |
78% |
81% |
81% |
|
Inrush Current |
Coldstart 20A/115VAC 40A/230VAC |
|
Leakage Current |
<1mA /240VAC |
|
|
|
|
PROTECTION |
|
|
Over Load |
CH1,CH2:105 ~ 135% CH3:0.51 ~ 0.9Arated output power |
|
Protection type:AC Charging Mode:Hiccup mode,recovers automatically after fault condition is removed UPS Mode:Protected by internal fuse |
|
Over Voltage |
CH1:15.87~18.63V |
CH1:31.74~37.26V |
CH1:62.1~72.9V |
|
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
|
Battery Low |
10V±0.8V |
19.5V±1.5V |
39V±2V |
|
|
|
|
ENVIRONMENT |
|
|
Working Temp. |
-10~+60℃(Refer to“Derating Curve”) |
|
Working Humidity |
20~90%RH non-condensing |
|
Storage Temp.,Humidity |
-20~+85℃,10~95%RH |
|
Temp.Coefficient |
±0.03%/ ℃(0~50℃ )on CH1 output |
|
Vibration |
10~500Hz,2G10min./1cycle,60min.each along X, Y,Z axes |
|
|
|
|
SAFETY &EMC |
|
|
Safety Standards |
Design refer to UL60950-1, TUV EN60950-1 |
|
Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|
Isolation Resistance |
I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25℃ /70%RH |
|
EMC Emission |
Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3 |
|
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A |
|
|
|
|
OTHERS |
|
|
Dimension |
119*11*50mm(L*W*H) |
|
Weight |
1Kg |
|
Packing |
20pcs/12.6Kg/0.75CUFT |
|
|
|
|
NOTE |
|
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meetsEMC directives. |
