| Industrial Design |
High-powered industrial cellular module |
| High-powered industrial 32bits CPU |
| Low power consumption design, support multi-sleep and trigger modes |
| Housing: iron, providing IP30 protection. |
| Power range: DC 5~35V |
| High Reliability |
Support hardware and software WDT |
| Support auto recovery mechanism, including online detect, auto redial when offline to make it always online |
| RS232/RS485/RS422 ports:15KV ESD protection |
| SIM/UIM port: 15KV ESD protection |
| Power port: reverse-voltage and over voltage protection |
| Antenna port: lightning protection(optional) |
| Standard and Convenience |
Adopt terminal block interface, convenient for industrial application |
| Support standard RS232/RS485 ports that can connect to serial devices directly |
| Two RS232 interfaces can be customized |
| TTL logic level UART interface can be customized |
| Support intellectual mode, enter into communication state automatically when powered |
| Support several work modes |
| Convenient configuration and maintenance interface |
| High-performance and Security |
Support TCP server, it can support 4 TCP connections at the same time |
Support double data centers, one main and another backup
and multi data centers synchronous transmission(5 data centers) |
| Support multi online trigger ways, including SMS, ring and data. |
| Supply 2 I/O channels, compatible 2 ADC inputs, 2 OC inputs、2 OC outputs(drive capability 20mA) |
| Support dynamic domain name(DDNS) and IP access to data center |
| Support link disconnection when timeout |
| Design with standard TCP/IP protocol stack |
| Support APN/VPDN |
| Hardware System |
CPU |
Industrial 32 bits CPU |
| FLASH |
4MB |
| SDRAM |
256KB(Extendable to 1MB) |
| Interface |
Serial |
2 RS232 port and 1 RS485(or RS422) port, 15KV ESD protection
Data bits: 5, 6, 7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space, mark
Baud rate: 1200~256000bits/s |
| Antenna |
Cellular: Standard SMA female interface, 50 ohm
GPS(optional):Standard SMA female interface, 50 ohm |
| SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
| Power |
Terminal block interface, reverse-voltage and over voltage protection |
| Indicator |
“PWR”、”RUN”、”Online”、”GPS”(optional) |
| Network |
Wireless Network |
GSM/GPRS/EDGE: 850/900/1800/1900MHz
CDMA: 800/1900MHz
WCDMA/HSUPA/HSPA+: 850/900/1900/2100MHz
CDMA2000 1x/ EVDO Rev. A: 800/1900MHz
TD-SCDMA: 1880-1920/2010-2025MHz(A/F)
TDD-LTE: Band 38/39/40/41& Band 61/62
FDD-LTE: Band 1/2/3/4/5/7/8/13/17/20/25/28 |
| PPP Protocol |
Support PPP Protocol |
| PPP Heartbeat |
Maintaining links with the cellular network to prevent forced sleep, to ensure the stability of dial-up link. |
| Network Authentication |
Support CHAP/PAP Authentication |
| TCP Heartbeat |
Monitor the server connection |
GPS
(optional)） |
Receiver Type |
50-channle
GPS L1（1575.42MHz）C/A code
SBAS: WAAS,EGNOS,MSAS,GAGAN |
| Max. update rate |
5 Hz |
| Accuracy |
Position: 2.5m CPE
SBAS: 2.0m CPE |
| Acquisition |
Cold starts: 32S
Warm starts: 32S
Aided starts: <1S
Hot starts: <3S |
| Sensitivity |
Tracking: -160dBm
Reacquisition: -160dBm
Cold starts: -146dBm |
| Timing accuracy |
RMS: 30ns
99%: <60ns
Granularity: 21ns |
| Time pulse |
Configurable, 0.25 to 1000Hz |
| Power supply |
Standard Power |
DC 12V/1.5A |
| Power range |
DC 5~35V |
| Communication Current |
<100mA (@12VDC) |
| Sleep current |
<8mA（@12VDC） |
| Physical |
Dimensions |
91x59x23mm |
| Weight |
175g |
| Environmental Limits |
Operating Temperature |
-35~+75ºC (-31~+167℉) |
| Storage Temperature |
-40~+85ºC (-40~+185℉) |
| Operating Humidity |
95% ( unfreezing) |
