Bộ đổi nguồn tổ ong 220VAC sang 5VDC 7A Leyu LRS-35-5

Chia sẻ:
Mã sản phẩm: LRS-35-5
Thương hiệu: Leyu
Tình trạng: Còn hàng

Bộ đổi nguồn tổ ong 220VAC sang 5VDC 7A Leyu LRS-35-5

Liên hệ
Mô tả

Bộ đổi nguồn tổ ong 220VAC sang 5VDC 7A Leyu LRS-35-5

35W Single Output Switching Power Supply  LRS-35 series

Features:

Universal AC input/ full range

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

High operating temperature up to 70℃

High efficiency, long life and high reliability

2 years warranty

SPECIFICATION

 

OUTPUT

 

Model

LRS-35-5

LRS-35-12

LRS-35-15

LRS-35-24

LRS-35-36

LRS-35-48

DC Voltage

5V

12V

15V

24V

36V

48V

Rated Current

7A

3A

2.4A

1.5A

1A

0.8A

Current Range

0~7A

0~3A

0~2.4A

0~1.5A

0~1A

0~0.8A

Rated Power

35W

36W

36W

36W

36W

38.4W

Ripple&Noise

80mVp-p

120mVp-p

120mVp-p

150mVp-p

200mVp-p

200mVp-p

VoltageAdj. Range

4.5 ~ 5.5V

10.2~ 13.8V

13.5~18V

21.6~28.8V

32.4~39.6V

43.2~52.8V

Voltage Tolerance

±2.0%

±1.0%

±1.0%

±1.0%

±1.0%

±1.0%

Line Regulation

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

Load Regulation

±1.0%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

Setup,Rise Time

1000ms, 30ms/230VAC   2000ms, 30ms/115VAC at full load

Hold Up Time

30ms/230VAC   12ms/115VAC at full load

 

 

INPUT

 

Voltage Range

85 ~ 264VAC    120 ~ 373VDC

Frequency Range

47 ~ 63Hz

Efficiency

82%

86%

86%

88%

88%

89%

AC Current

0.7A/115VAC  0.42A/230VAC

Inrush Current

Cold start 45A/230VAC

Leakage Current

<0.75mA / 240VAC

 

 

PROTECTION

 

Over Load

110 ~ 150% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

5.75~6.9V

13.8~16.2V

18.75~21.75V

28.8~33.6V

41.4~48.6V

55.2~64.8V

Protection type: shut down o/p voltage, re-power on to recover

 

 

ENVIRONMENT

 

Working Temp.

-30 ~ +70℃ (Refer to “derating curve”)

Working Humidity

20 ~ 90% RH non-condensing

StorageTemp., Humidity

-40 ~ +85℃, 10 ~ 95% RH

Temp. Coefficient

±0.03%/℃ (0 ~ 50℃)

Vibration

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

 

 

SAFETY &EMC

 

Safety Standards

UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved

Withstand Voltage

I/P-O/P:3.75KVAC   I/P-FG:2KVAC  O/P-FG:1.25KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH

EMC Emission

Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN 61000-3-2,-3

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A

 

 

OTHERS

 

Dimension

99*82*30mm (L*W*H)

Weight

0.23Kg

Packing

60pcs/carton/14.8kg/0.88CUFT

 

 

NOTE

 

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC directives.

7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

Đăng nhập
Đăng ký
Hotline: 0904251826
x